Belden Store
GAN22LU-D24-609

Product Number: GAN22LU-D24-609

Form A - Female 90° | #Contacts: 2+2 PE | Recovery Diode (FRD) & ye LED | 24 V | Cable: Grey (PVC); 0.75 mm2; IEC | cURus

Form A - Singled-Ended Female Angled Cordset | #Contacts: 2+2 PE | Recovery Diode (FRD) & yellow LED | 24 V / 10 A | Cable: Grey PVC Jacket; 3x0.75 mm2 (18 AWG); IEC | UL 2238; cURus

Availability
Global
Status
Active
Orderable items
2

Ships from and sold by A5 IT.

Part numbers

GAN22LU-D24-609 is a product family. Each item number below is a separate orderable part — colour, put-up and length differ.

Item #Item DescriptionCable LengthOrder
10565GAN22LU-D24-6090500-1UC5 mOrder online
21183GAN22LU-D24-60903003 mOrder online

Specifications

Product Life Cycle

Life CycleActive - Product is available
AvailabilityActive
Product FamilyValve Connectors
Side 1 Product Sub FamilyGAN - cURus 2238
Connector TypeCordset, single ended
Side 1 Type of Contact/GenderSocket Contact / Female
Connector DesignAngled (90°) Body
Number of Pins2+2 PE
Coding, Side 1A
Shielding TypeUnshielded
Attachment TypeCentral Screw
Voltage Rating24 V
Rated Impulse Voltage4.0 kV (PCBA 2.0 kV)
Operating Voltage24 V DC
Current Rating10 A
Side 1 Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 50
Cross Section0.75 mm2
Ambient Temperature (Operation)*- 25 °C - + 85 °C [Extended Temperature - 40 °C - + 105 °C with additional gasket accessory, 934887001]
Protection Degree / IP Rating**IP65, IP67*
Side 1 Design StandardDIN EN 175301-803-A, ISO 4400
Side 1 Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage DistanceDIN EN 60664-1 (2008/01); VDE 0110-1
Overvoltage CategoryIII acc. to DIN EN 60664-1 (VDE 0110-1)

Face View

Pin 1brown
Pin 2blue
PE1green-yellow
PE2green-yellow

Materials

Contact Base MaterialBrass (CuZn)
Side 1 Contact PlatingTin over Copper (Cu/Sn)
Contact Bearer MaterialGlass-filled Polybutylene Terephthalate (PBT-GF)
Contact Bearer ColorBlack
Flammability Class (Contact Bearer)UL 94 V-0
Molded Body MaterialThermoplastic Polyurethane (TPU)
Molded Body ColorGrey translucent
Flammability Class (Molded Body)UL 94 HB
Attachment MaterialSteel, Philips combi slot
Gasket MaterialMolded Integrated Gasket

Circuitry

Protection CircuitryRecovery Diode (FRD) & yellow LED
Function IndicatorYellow LED
Protective CircuitRecovery Diode (FRD) & Function Indicator (LED)
Fastening Torque (Attachment)(50-60) Ncm
Accessories to Order Separately934887001 - GAN EPDM gasket and holding clip

Cable Data

Cable Number609
Conductor Size0.75 mm2
Number of Wires3
Minimal Bending Radius (Fixed Inst)˃ 5 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Conductor MaterialCu
Cable Jacket MaterialPolyvinyl Chloride (PVC)
Cable Jacket ColorGrey
Cable Diameter DØ 5.5 mm [ 0.217 " ]
Wire Insulation MaterialPolyvinyl Chloride (PVC)
Insulated Wire DiameterØ 1.70 mm [ 0.07 " ]
Ambient Temperature (Fixed Installation)- 40 °C to + 105 °C
Ambient Temperature (Flex Installation)+ 5 °C to + 105 °C
Flammability Class (Cable Jacket)DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2
Cable Characteristicsfree off lacquer wetting disturbing substances, good chemical and oil resistance, Exclusion of Silicone

Approvals

UL-FileE315587
ULUL 2238; cURus
VDEYes

Safety & Environmental Compliance

RoHS CompliantYes

Resistances

HalogenfreeNo
Oil ResistanceIEC 60811:404

Notes

Note DeratingNotice derating
Protection Degree / IP Rating Note*IP Rating test performed by Belden with Belden Connectors only
Note1. Do not connect or disconnect under load. 2. Extended temperature range of -40°C performed by Belden in mated condition using EPDM gasket accessory.

Resources

Related valve connectors