Belden Store
RS 1001M-752

Product Number: RS 1001M-752

MINI C | Cordset | 1-1/8 Male Straight, 10-pin → Open End | Yellow TPE; 18 AWG | 300 V / 7 A

MINI C | Single-Ended Cordset | 1-1/8 Male Straight, 10-pin → Open End | Cable Yellow TPE; 18 AWG | 300 V / 7 A

Availability
Global
Status
Active
Orderable items
10

Ships from and sold by A5 IT.

Part numbers

RS 1001M-752 is a product family. Each item number below is a separate orderable part — colour, put-up and length differ.

Item #Item DescriptionCable LengthOrder
500003992RS 1001M-752/1M1 mOrder online
500003994RS 1001M-752/2M2 mOrder online
500003995RS 1001M-752/3M3 mOrder online
540001794RS 1001M-752/4M4 mOrder online
500003996RS 1001M-752/5M5 mOrder online
540001796RS 1001M-752/6M6 mOrder online
540003989RS 1001M-752/8M8 mOrder online
500003991RS 1001M-752/10M10 mOrder online
540003450RS 1001M-752/12M12 mOrder online
500003993RS 1001M-752/20M20 mOrder online

Specifications

Information

Product FamilyPower Connector
Side 1 Product Sub FamilyMINI 1-1/8"
Connector TypeCordset, single ended
Side 1 Type of Contact/GenderPin Contact / Male
Connector DesignMolded | 1-1/8" Male | Straight
Number of Pins10 (9+PE)
Coding, Side 1A
Shielding TypeUnshielded
Attachment TypeFemale Thread, Coupling Nut
Voltage Rating300 V
Rated Voltage (UL)300 V
Operating Voltage300 V AC/DC
Current Rating7 A
Rated Current (UL)*Power 7 A | Signal 7 A
Mating Cycles≤ 100
Ambient Temperature (Operation)*- 40 °C to + 90°C
Protection Degree / IP Rating**IP65, IP67
Note Derating* Notice derating
Protection Degree / IP Rating NoteIP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note1. Do not connect or disconnect under load.

Face View

Pin 1orange
Pin 2blue
Pin 3white/black
Pin 4red/black
Pin 5green/black
Pin 6orange/black
Pin 7red
Pin 8green
Pin 9black
Pin 10white

Materials

Contact Base MaterialCopper Alloy (CuZn)
Side 1 Contact PlatingCopper-Silver-Gold-Alloy (Cu/Ag/Au)
Contact Bearer MaterialThermoplastic polyurethane (TPU)
Contact Bearer ColorYellow
Flammability Class (Contact Bearer)UL 94 HB
Molded Body MaterialThermoplastic polyurethane (TPU)
Molded Body ColorYellow
Flammability Class (Molded Body)UL 94 HB
Attachment MaterialAluminum (Al)
Attachment PlatingAnodized Black

Circuitry

Fastening Torque (Attachment)MINI: 70 Ncm, hand-tight

Cable Data

Cable Number752
Conductor Size18 AWG
Number of Wires10
Minimal Bending Radius (Fixed Inst)˃ 5 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Cycles (Bending)˃ 5 mio
Conductor MaterialCu
Cable Jacket MaterialThermoplastic Elastomers (TPE)
Cable Jacket ColorYellow
Cable Diameter DØ 9.65 mm | 0.380”
Wire Insulation MaterialPolyvinyl Chloride (PVC)
Insulated Wire DiameterØ 2.05 mm | 0.081"
Overall Shield (Cable)Unshielded
Ambient Temperature (Fixed Installation)- 40 °C to + 90 °C
Ambient Temperature (Flex Installation)- 5° C to + 90° C
Ambient Temperature (Fixed Installation short-term 100h)- 40 °C to + 90 °C
Ambient Temperature (Drag Chain Inst)- 5° C to + 90° C
UL Cable Type(UL) PLTC or AWM 20626
Flammability Class (Cable Jacket)VW-1, FT4
Cable CharacteristicsFlexibility: Good | Abrasion Resistance: Good | Chemical Resistance: resists water, oils, greases, acids, alkalis, and many solvents| Flame Retardance: Good | Halogen-Free: No | Mechanical Durability: Good (resists impact; tear; and flex) | Environmental Suitability: indoor / controlled environments

Approvals

UL-FileE315587
ULUL 2238; cURus

Safety & Environmental Compliance

RoHS CompliantYes

Resistances

HalogenfreeNo
Oil ResistanceYes

Notes

Note Derating* Notice derating
Protection Degree / IP Rating NoteIP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note1. Do not connect or disconnect under load.

Resources

Related lumberg automation circular connectors 7/8", 1", 1 1/8" series