Product Number: NB1810-2Wac4Ep

High-Performance Router with GbE, GbE/SFP Combo, 2x WLAN-ac, 4xGbE PoE PSE

Hich-Performance Router with 1x Gigabit Ethernet , 1x Gigabit / SFP Combo, 2x WLAN 802.11ac (Wi-Fi 5), 4x Gigabit Ethernet Switch with PoE PSE (Power Source Equipment)

Availability: Global
Status: Active
Orderable items: 1

Ships from and sold by A5 IT.

Part numbers

NB1810-2Wac4Ep is a product family. Each item number below is a separate orderable part — colour, put-up and length differ.

Item #	Type	Order
942998267	NB1810-2Wac4Ep	Order online

Specifications

Product Overview

WAN	IPv4; IPv6; IP Passthrough; DynDNS Client; PPPoE;

Product Life Cycle

Life Cycle	Active - Product is available

General Information

Scope of delivery	Device, General safety instructions, 1x Terminal block 3.5mm

More Interfaces

USB interface	1 x USB 2.0 socket to connect an approved USB storage device, USB Type A socket
Local Management and Device Replacement	Management via Web (HTTPs); Command Line Interface (CLI) over SSH/Serial/Web; SNMP v1/v2c/v3; Discovery via LLDP, CDP, FDP, SONMP, EDP, IRDP
Ethernet Connector Type	Gigabit Ethernet: Auto MDIX, 1000/100/10 Mbps; 1x RJ45; 1x Combo RJ45 or SFP (SFF-8472, max. Class 1 module, 1.25 GBd ±100 ppm, 3.3 VDC ± 10%); 4-Port RJ45 Gbit Ethernet Switch as PoE+ PSE (Power Source Equipment) max. 30W per port, 60W total
Power Supply	5-pin terminal block (connector included)
Serial	1x RS-232, RS-485; Signals GND, TX, RX; Up to 115kBit/s
Storage	4 GB flash
LEDs	6 LEDs + Ethernet LEDs (Speed, Activity)

Radio technology

Load Balance	Link Prioritizatoin and Aggregation; Load Balancing; Diffserv; SFQ; HTB; Priority based Queuing

Modules

Description	Module 4
MIMO	On both (2x) modules: 2x2 MIMO; Max. 866 Mbps
Antenna Connector	On both (2x) modules: 2x SMA female
Additional Radio Features	On both (2x) modules: WLAN FCC ID: TK4WLE600VX
Radio Protocol	On both (2x) modules: 802.11 a/b/g/n/ac (Wi-Fi 5)
Frequency Band	On both (2x) modules: WLAN 2.4 or 5 GHz
Access Point Functionality	On both (2x) modules: Yes (up to 100 clients)
Client / STA Functionality	On both (2x) modules: Yes

Power requirements

Operating Voltage	48 VDC (±10%)
Power Consumption	82 W average, 90 W maximum

Diagnostics features

Alarm and event actions	Email; SMS
Monitoring	Watchdogs (Hard- and Software); Link Supervision; MQTT Broker

Service

Other services	DNS Cache;

Software

Radius Server	External Radius Server Management User Authentication
Software features	Software Development Kit (SDK);
Software Version	5.0 (updates free of charge)
Operating system	NRSW (NetModule Router Software)
Switching	VLAN (802.1Q)
Redundancy	Multipath TCP, VRRP (Virtual Router Redundancy Protocol), RSTP (Rapid Spanning Tree Protocol)
Diagnostics	Netflow (Softflow), Ping, Traceroute, Tcpdump, Speed Test
Configuration	DHCP Client and Server
Security	Certificate Management (SCEP Client, Signing Requests), Certificate formats: PKCS12, PKCS7, PEM/DER, RSA/Ed25519 (OpenSSH/Dropbear), "Let's encrypt" support, Elliptic Curve Certificates (ECC), 802.1x for LAN, Stateful Firewall, Connection Tracking, Bridge Filtering
Time synchronisation	NTP Client and Server, SNTP Server
Routing	Destination, Policy, Multipath, OSPF, BGP, Multicast, TCP-MSS Clamping, NAT, NAPT, Masquerading
Management Software	Compatible with "Connectivity Suite"

Ambient conditions

Operating temperature	-40-+50 °C
Relative humidity (non-condensing)	0-95 %
Dimensions (WxHxD)	95 mm x 128/140 mm x 121 mm
Weight	1100 g
Housing Material	brushed aluminium
Mount Type	DIN Rail 35 mm
Mating Side	from the front, top and bottom