SPE T1 Industrial PCB insert, angled, soldering, in sample package
SPE T1 Industrial PCB THT Receptacles (Jack), angled, soldering, in sample package
- Availability
- Global
- Status
- Active
Specifications
Face View
| Product Family | SPE Receptacles |
|---|---|
| Side 1 Product Sub Family | SPE Receptacle T1 Industrial |
| Connecting Side | Soldering |
| Side 1 Type of Contact/Gender | Female |
| Connector Design | Angled |
| Number of Pins | 2 |
| Shielding Type | Shielded |
| Voltage Rating | 60 V |
| Operating Voltage | < < 50 V AC / 60 V DC |
| Current Rating | 4 A |
| Side 1 Contact Resistance | ≤ 10 mOhm |
| Insulation Resistance | ˃ 5x10^8 Ohm |
| Testing Voltage Pin - Pin | 1 kV DC |
| Testing Voltage Pin - Shield | 2.25 kV DC |
| Transmission characteristics | 4 GHz |
| Data Rate | 10 Mbit/s 100 Mbit/s 1 Gbit/s 2.5 Gbit/s 5 Gbit/s 10 Gbit/s |
| Mating Cycles | ≥ 1000 |
| Thread Plating | Nickel-plated |
| Ambient Temperature (Operation)* | - 40°C - +85°C |
| Protection Degree / IP Rating** | IP20 |
| Side 1 Design Standard | IEC 63171-6, IEEE 802.3bu (remote power supply over PoDL = Power over Data Line), IEEE 802.3cg (10BASE-T1) |
| Side 1 Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Moisture Sensitivity Level (MSL) | 1 acc. ECA/IPC/JEDEC J-STD-020D |
| Process Sensitivity Level (PSL) | R0 acc. ECA/IPC/JEDEC J-STD-020D |
Safety & Environmental Compliance
| RoHS Compliant | Yes |
|---|
Notes
| Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
|---|
Resources
Belden T1INDS-LL-WS/5,1 S technical datasheetEnable Edge Connectivity & Minimize Network Complexity with SPESingle Pair Ethernet in the Industrial FieldSingle Pair Ethernet Less is More WebinarOvercoming the Hurdles of Single Pair Ethernet Proliferation6 Advantages of Single Pair EthernetSee What's Driving the Trend Behind Single Pair Ethernet
