Request a quote
Belden Store
RSWU 12-RKWU 12-S4741

Product Number: RSWU 12-RKWU 12-S4741

M23-M23 - Male 90° to Female 90° | #Contacts: 12 |125 V | Cable: Yellow (TPE); 8x0.5 mm2 + 3x1.0 mm2; IEC

M23 - Male Angled Cordset | #Contacts: 12 | M23 - Female Angled Cordset | #Contacts: 12 | 125 V / 8 A | Yellow TPE Jacket, 8x0.5 mm2 (20 AWG) + 3x1.0 mm2 (17 AWG), IEC

Availability
Global
Status
Active
Request a quote

Ships from and sold by A5 IT.

Specifications

Information

Product FamilyPower Connector
Connector TypeCordset, double ended
Shielding TypeUnshielded
Voltage Rating125 V
Rated Impulse Voltage1.5 kV
Operating Voltage110 V AC/DC
Current Rating8 A
Protection Degree / IP Rating NoteIP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note Derating* Notice derating
ParticularitiesWhen the connector is unlocked and in risk of pollution the connector has to be covered with a protective cap ≥ IP54.

Face View Side 1

Pin 1white
Pin 2green
Pin 3yellow
Pin 4grey
Pin 5grey-pink
Pin 6red-blue
Pin 7white-green
Pin 8brown-green
Pin 9blue
Pin 10blue (bridge to pin 9)
Pin 11brown
Pin 12green-yellow

Face View Side 2

Pin 1white
Pin 2green
Pin 3yellow
Pin 4grey
Pin 5grey-pink
Pin 6red-blue
Pin 7white-green
Pin 8brown-green
Pin 9blue
Pin 10blue (bridge to pin 9)
Pin 11brown
Pin 12green-yellow

Technical Data Side 1

Side 1 Product Sub FamilyM23 Power
Side 1 Type of Contact/GenderPin Contact / Male
Connector DesignM23 | Male |12 Pole | 90°
Attachment TypeFemale Thread (coupling nut)
Number of Pins12
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Cross Section8x0.5mm2 + 3x1.0 mm2
Ambient Temperature (Operation)*- 25 °C to + 80 °C
Protection Degree / IP Rating**IP67
Side 1 Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage Distanceacc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage CategoryII acc. to DIN EN 60664-1 (VDE 0110-1)
Contact Base MaterialBrass (CuZn)
Side 1 Contact PlatingGold over Copper (Cu/Au)
Contact Bearer MaterialPolybutylene terephthalate (PBT)
Contact Bearer ColorWhite
Flammability Class (Contact Bearer)UL 94 V0
Molded Body MaterialThermoplastic Polyurethane (TPU)
Molded Body ColorYellow
Flammability Class (Molded Body)UL 94-HB
Attachment MaterialBrass (CuZn)
Attachment PlatingNickel (Ni)
O-Ring MaterialNitrile Butadiene Rubber (NBR)
Gasket MaterialNitrile Butadiene Rubber (NBR)
NoteDo not connect / disconnect under load.

Cable Data

Cable NumberS4741
Conductor Size8x0.5mm2 + 3x1.0 mm2
Number of Wires11
Minimal Bending Radius (Fixed Inst)˃ 5 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Cycles (Bending)˃ 2 M
Conductor MaterialCu
Cable Jacket MaterialThermoplastic elastomers (TPE)
Cable Jacket ColorYellow
Cable Diameter DØ 10.00 [0.39]"
Wire Insulation MaterialPolypropylene (PP)
Insulated Wire Diameter8 x Ø 1.45 mm [0.057"] + 3 x Ø 1.95 mm [0.077"]
Ambient Temperature (Fixed Installation)- 25 °C to + 80 °C (PLTC 75 °C)
Ambient Temperature (Flex Installation)- 5 °C to + 80 °C (PLTC 75 °C)
Ambient Temperature (Drag Chain Inst)- 25 °C to + 60 °C
UL Cable TypePLTC
Flammability Class (Cable Jacket)DIN EN 60332-1-2, VDE 0482-332-2-2, IEC 60332-1-2, UL 1685 vertical tray
Cable CharacteristicsFlexibility: Excellent | Abrasion Resistance: Excellent | Oil & Chemical Resistance: Excellent | UV Resistance: Excellent | Low Temp Performance: Excellent (flexible to -40°C) | Flame Retardance: Good | Halogen-Free: Yes | Mechanical Durability: Excellent (resists impact, tear, and flex) |Drag Chain | Environmental Suitability: Outdoor, oily, wet, or rough environments

Technical Data Side 2

Side 2 Product Sub FamilyM23 Power
Side 2 Type of Contact/GenderSocket Contact / Female
Connector Design, Side 2M23 | Female |12 Pole | 90°
Attachment Type, Side 2Female Thread (coupling nut)
Number of Pins, Side 212
Insulation Resistance, Side 2˃ 10^9 Ohm
Mating Cycles, Side 2≤ 100
Conductor Cross Section, Side 28x0.5mm2 + 3x1.0 mm2
Ambient Temperature (Operation), Side 2*- 25 °C to + 80 °C
Protection Degree / IP Rating, Side 2**IP67
Pollution Degree, Side 23 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage Distance, Side 2acc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage Category, Side 2II acc. to DIN EN 60664-1 (VDE 0110-1)
Contact Base Material, Side 2Brass (CuZn)
Contact Plating, Side 2Gold over Copper (Cu/Au)
Contact Bearer Material, Side 2Polyamide (Nylon), PA 6.6
Contact Bearer Color, Side 2Black
Flammability Class (Contact Bearer), Side 2UL 94-HB
Molded Body Material, Side 2Thermoplastic Polyurethane (TPU)
Molded Body Color, Side 2Yellow
Flammability Class (Molded Body), Side 2UL 94-HB
Attachment Material, Side 2Brass (CuZn)
Attachment Plating, Side 2Nickel (Ni)
O-Ring Material, Side 2Fluorocarbon rubber (FKM)
Gasket Material, Side 2Fluorocarbon rubber (FKM)
Note, Side 2Do not connect / disconnect under load.

Safety & Environmental Compliance

REACHYes
RoHS CompliantYes

Resistances

HalogenfreeNo
Oil ResistanceYes

Notes

Protection Degree / IP Rating NoteIP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note Derating* Notice derating
ParticularitiesWhen the connector is unlocked and in risk of pollution the connector has to be covered with a protective cap ≥ IP54.

Resources

Belden RSWU 12-RKWU 12-S4741 technical datasheetIndustrial Power Connectors

Related power connectors

0905 203 301

0905 203 301

DeviceNet Power Supply Cable, 7/8" Power Single-Ended Cordset: Female straight, 3-pin(2+PE), black body, 63 V, 12 A; PUR black cable, 1.00 mm2

0905 203 302

0905 203 302

DeviceNet Power Supply Cable, 7/8" Power Double-Ended Cordset: Male straight to Female straight, 3-pin(2+PE), black body, 63 V, 12 A; PUR black cable, 1.00 mm2

3 items
0906 UTP 301

0906 UTP 301

Molded Tee Connector: 5 Contacts; one 7/8" Male x two 7/8" Female; 300 V | 8 A (truck) 4 A (drop)

1 item
0906 UTP 301-Y

0906 UTP 301-Y

Molded Tee Connector: 5 Contacts; one 7/8" Male x two 7/8" Female; 300 V | 8 A (truck) 4 A (drop)

1 item