M12 Power Single-Ended Cordset: Female, angled, 5-pin(4+FE), L-coded, shielded, blue body, 50 V AC/60 V DC, 20 A; PUR grey cable, ca. 2,5mm2

Name: Belden RKWTS 5L-1021
Brand: Lumberg Automation
SKU: RKWTS 5L-1021

M12 Power Single-Ended Cordset: Female, angled, 5-pin(4+FE), L-coded, shielded, blue body, 50 V AC/60 V DC, 20 A; PUR grey cable, 2.5 mm2

Ships from and sold by A5 IT.

Part numbers

RKWTS 5L-1021 is a product family. Each item number below is a separate orderable part — colour, put-up and length differ.

Item #	Item Description	Cable Length	Order
934850189	RKWTS 5L-1021/3 M	3 m	Order online
934850190	RKWTS 5L-1021/5 M	5 m	Order online
934850191	RKWTS 5L-1021/10 M	10 m	Order online
934850192	RKWTS 5L-1021/15 M	15 m	Order online

Product Family	Power Connector
Side 1 Product Sub Family	M12 Power
Connector Type	Cordset, single ended
Side 1 Type of Contact/Gender	Socket Contact / Female
Connector Design	Molded \| M12 Female \| Angled
Number of Pins	5
Coding, Side 1	L
Shielding Type	Shielded
Attachment Type	Coupling Nut
Voltage Rating	63 V
Rated Voltage (UL)	63 V
Rated Impulse Voltage	1.5 kV
Operating Voltage	60 V AC/DC
Current Rating	24 A
Rated Current (UL)*	16 A (UL Certified); Product is designed to meet UL 20 A requirements, it is NOT certified yet; a UL 20 A certification process can be initiated upon special request based on a separate agreement with us.
Side 1 Contact Resistance	≤ 10 mOhm
Insulation Resistance	˃ 10^9 Ohm
Mating Cycles	≤ 100
Ambient Temperature (Operation)*	-40 °C to +125 °C, notice derating
Protection Degree / IP Rating**	IP65, IP67, IP69K
Side 1 Design Standard	IEC 61076-2-111
Side 1 Pollution Degree	3 acc. to IEC 60664-1
Clearance / Creepage Distance	IEC 60664-1 (2020-05)
Overvoltage Category	III acc. to IEC 60664-1
Note Derating	* Notice derating
Protection Degree / IP Rating Note	IP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note	1. Do not connect or disconnect under load.
Product Characteristics	To ensure ingress protection, please check the O-ring’s position before connecting. Improperly positioned O-ring leads to ingress protection potential failure.

Contact Base Material	Copper Alloy (CuNi)
Side 1 Contact Plating	Gold over Copper (Cu/Au)
Contact Bearer Material	Glass-filled Polybutylene Terephthalate (PBT GF)
Contact Bearer Color	Grey
Flammability Class (Contact Bearer)	UL 94 V-2
Molded Body Material	Thermoplastic Elastomer (TPE)
Molded Body Color	Black
Flammability Class (Molded Body)	UL 94 HB
Attachment Material	Copper Alloy (CuZn)
Attachment Plating	Nickel (Ni)
Shielding Material	CuZn, plating: Ni
O-Ring Material	Fluoroelastomer (FKM)

Fastening Torque (Attachment)	M 12x1: (50-60) Ncm, hand-tight

Cable Number	1021
Conductor Size	2.5 mm2
Number of Wires	5
Minimal Bending Radius (Fixed Inst)	˃ 4 x D
Minimal Bending Radius (Flexible Inst)	˃ 7.5 x D
Cycles (Bending)	˃ 10 Mio, max. 50 m/s2
Cycles (Torsion)	˃ 5 Mio @ ± 30 °/1 m
Conductor Material	Cu
Cable Jacket Material	Polyurethane (PUR)
Cable Jacket Color	Grey
Cable Diameter D	Ø 10.6 \| 0.417"
Wire Insulation Material	Polypropylene (PP)
Insulated Wire Diameter	Ø 2.90 mm \| 0.114"
Overall Shield (Cable)	Tinned Copper Braided Screen
Ambient Temperature (Fixed Installation)	- 40 °C to + 90 °C
Ambient Temperature (Flex Installation)	- 30 °C to + 90 °C
Ambient Temperature (Fixed Installation short-term 100h)	-40 °C to +125 °C
Ambient Temperature (Drag Chain Inst)	- 20 °C to + 60 °C
UL Cable Type	AWM Style 20939
Flammability Class (Cable Jacket)	VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1

UL-File	E497237
UL	UL 2237; cULus

RoHS Compliant	Yes

Halogenfree	DIN VDE 0472 T.815, IEC 60754-1
Oil Resistance	HD 22.10 Appendix A, DIN EN 60811-404

Note Derating	* Notice derating
Protection Degree / IP Rating Note	IP Rating tested according to IEC standard using combination of a Hirschmann or Lumberg Automation connector mounted and locked
Note	1. Do not connect or disconnect under load.
Product Characteristics	To ensure ingress protection, please check the O-ring’s position before connecting. Improperly positioned O-ring leads to ingress protection potential failure.